.jpg)
Poster Session
Students from San Jose State University and other universities around California dedicated time and effort to research different topics related to their field of study. Posters would be displayed during the duration of the conference. For those who are interested, there will also be an afternoon session for project discussion.
The 2021 conference projects are listed below.
Undergraduate Research Projects
NoLapse - Anti-Stoma Prolapse Device
Heather Cruz, Anmolpreet Mavi, Shivani Parmar
San Jose State University
The No-Lapse is a silicone-based medical device composed of two rings connected by a rod, providing a non-surgical cure to a stoma prolapse. One ring is inserted through the stoma opening into the abdominal wall, and the other externally communicating.
Characterizing the Performance of Fluidic Muscles for Use in an Assistive Knee Brace
Haadi Elahi*, Indeever Madireddy**, Aayush Vemuri**, Marvin Perez*
* San Jose State University, ** IntelliScience Institute
Custom fluidic muscles have been constructed and tested under different operating pressures and loads. Analysis of the muscle behavior was used to redesign an assistive knee brace for muscle rehabilitation.
Investigation of a DBD Plasma Helium Jet for Medical Applications
Khadijah Atthar, Bhavya Bellannagari*, Vedmanvitha Ketireddy*, Anthony Suman**, Neha Suri*, Alaap Rag*, Sohail Zaidi
*IntelliScience Training Institute, San Jose **Department of Mechanical Engineering, San Jose State University, San Jose.
Plasma jet devices are developed for their effective use in medicine. A plasma jet device was characterized by measuring plasma plume temperatures, lengths, input powers, and plasma radical emission lines.
Design Evolution of a DBD Plasma Jet Device for Rapid Wound Healing and Sterilization
Michael Banga**, Bhavya Bellannagari*, Kathy Hoang**, Shivani Kota*, Hiral Mehta*, Raghav Pramod Murthy*, Sohail Zaidi**
**Department of Mechanical Engineering, San Jose State University, San Jose
This work presents the development of three plasma jet torches for rapid wound healing/sterilization. The limitations of each plasma jet torch were identified and were eliminated by a subsequent design.
Characterization of anisotropic properties of FFF infill percentage and pattern
Hieu Nugyen, Ruth Sosa
San Jose State University, Jabil
The purpose of this project is to characterize the anisotropic flexural properties of 3D printed infill patterns produced from flexible thermoplastic elastomer materials in Fused Filament Fabrication (FFF) applications.
Disinfection Robot
Ngoc Tu, Dhonald Gatpo, Rupinderjit Virik
San Jose State University, Jabil
Our long-term goal is to research and develop an autonomous disinfection robot that performs cleaning and sanitization for places with high risks of disease transmission. The overall objective of this project is to design a functional model of an autonomous sanitization robot, and build and test the functional prototype to verify if it fully meets the design specifications.
A Review of Hemostasis and Thrombosis Microfluidics
Rabena Amanuel; Sarita Kumari; Izza Murtaza
San Jose State University
A literature review compiling relevant new information on aspects of thrombosis and hemostasis microfluidics such as design, fabrication, and detection methods focused on the improvement of clinical translation of coagulation therapeutics.
Fluid Behavior Evaluation for varying Hydrophobicity and RPM Level in Centrifugal Step Emulsification Chips
Swetha Edavath Kandiyil, Ralion Herzog
San Jose State University
Our project focuses on evaluating our centrifugal step emulsification chips’ ability to achieve controllable droplet generation based on differing hydrophobicity level and rpm.
Microfluidic Sensor System to Investigate Cell-Secreted Biomarkers
Fiara Llaguno
San Jose State University
To improve accuracy and speed of diagnosing and studying pediatric atopic dermatitis (AD), we aim to develop a microfluidic, electrochemical biosensor for multiplex detection of AD biomarkers interferon-gamma and interleukin-31.
Design and Fabrication of the Optically-Clear Test Section and Heart Valve
Jericho Liba, Zachary Orcullo,
Vy Truong
San Jose State University
In our research project, we created a transparent test section via 3D printing, which is a vital component of the Mock Circulation Loop (MCL), which the MCL, overall, is not within the spectrum of this project. In order to observe the test section's efficiency through leakages and distortion, we created a blood analogue, or a transparent liquid that exhibits similar properties to blood. Then we inserted the analogue into the test section via inlet to observe for leakages and distortion.
Evaluating The Effects of the Anastomotic Angle and Compliance Mismatch on the Hemodynamics of an End-to-Side Graft
Alyssa Occiano , Alex Guerra, Amelito Reyes
San Jose State University
The project consists of COMSOL simulations depicting fluid flow in an end-to-side anastomosis between the host artery and the graft. The results of the numerical data are analyzed to draw connections to intimal hyperplasia.
Bisphosphonate Delivery to Bones Using Cell Membrane-Coated Nanoparticles
Hannah Sofia Ochoa Sanchez, Arturo Chavez
San Jose State University
Our project serves to develop a more biocompatible and immunocompatible treatment for osteoporosis. Our approach selects the use of novel, hybridized cell membrane-coated nanoparticles that promote native interactions with cells.
Industrial Internet of Things (IIoT) - 3D HP Printer Connectivity
Angela Trans, Nicholas Armas, Nicole Arosteguy
San Jose State University, Jabil
The purpose of the project is to develop an Industrial Internet of Things (IIoT) platform for the model HP Jet Fusion 4200 3D Printer. Data Collection and Data Aggregation will be the focus of our research of the four IIoT phases, with the objective to establish a connectivity framework to enable printer data collection and apply data structuring methods to enhance data quality.
Green, Innovative, and Optimized Modular Packaging Design
Ekaterina Azrapkina, Randal Gee
San Jose State University
Packaging design optimization for various package types actively used in production with the opportunity to streamline operations and determine whether existing processes are adequate or if the change is recommended.
Microfluidics to Study Platelet-Mediated Circulating Tumor Cell Extravasation
Audrey Jebasingam; Britanie Butts; Feyza Yazar
San Jose State University
The purpose of this project is to design and fabricate a microfluidic chip that can be used to elucidate mechanisms involved in adhesion, arrest, and extravasation of circulating tumor cells.
Improving the design of a paper-based microfluidic device for colorimetric assay of serum creatinine based on the Jaffe reaction
Arjun Shyam, Camilla Hanson
San Jose State University
In our project, we simulated the performance of our microfluidic device using COMSOL. The goal of the improved device is to accurately measure serum creatinine levels while reducing the time required
Portable Sterilization System for Medical Instruments during Disaster Situations
Ben Phung, Federico Rojas
San Jose State University
During a disaster, the purity of needed medical devices may be compromised. Henceforth, this project aims to design a portable sterilization system to prepare EMTs for such situations.
The Effect of Electron Beam Radiation on the Performance of Force-Sensistive Resistors
Adam Schaps, James Mijares
San Jose State University
Our project is a pilot study into observing the effect electron beam sterilization may have on the performance capability of force-sensitive resistors using multiple resistor models and multiple dosing points to compare to non-irradiated versions of the same resistors.
Pectus Vac
Jeesu Kim, Miral Patel
San Jose State University
A literature review compiling relevant new information on aspects of thrombosis and hemostasis microfluidics such as design, fabrication, and detection methods focused on improvement of clinical translation of coagulation therapeutics.
Osteolysis Prevention for Titanium Hip Implants
David Canoy, Amanda Hawrysz, Mahnoor Khan , Kevin Wiest
San Jose State University
Abrasion testing in the femoral cavity is being analyzed. Research is being conducted to determine a bioactive polymer that may improve hip implant osseointegration to prevent aseptic loosening.
Microfluidic Chip to Characterize the Effect of Shear Flow on Pulmonary Vascular Endothelial Cell Barrier Function
Lianne Posadas,Jazmeen Ravendran Pillay
San Jose State University
We designed a microfluidic chip that mimics the fluidic environment inside of pulmonary vasculature in order to study the molecular mechanisms
Pathogen Mitigation: Plasma Activated Water
Christopher Valdivia, Veronica Romo
San Jose State University, Jabil
Plasma activated water contains reactive species making it a viable tool for pathogen mitigation. This project investigates the optimal conditions to generate high concentrations of reactive species and their lifespan.
Polymer Encasement for External Placement of Wireless Power Transfer Coils in Pacemaker Applications
Jeoffrey Ugalde, Jed Tran, Dikaios Wong
San Jose State University, Jabil
The purpose of this project is to identify polymer materials for wireless power transfer applications. The polymer shall envelope a wireless charging coil, located on the outside surface of a pacemaker. The encasing polymer type will be tested for effects on wireless power transfer and heat generation.
Other Research Poster
BMEidea, Corporate Research, National BMES Club,etc.
Contact Lens Coatings & Polarizations for Photosensitive Epilepsy
Gaayathria Catari, Maya Papez, Asadullaah Shakur
[1] San Jose State University
Designed a polarized, blue-tinted lens to minimize seizure outcomes in patients with photosensitive epilepsy. Utilizes therapeutic effects of blue light filters and polarization to reduce bright lights and glare triggers.
Stationary Foot Pressure Measurement System
Smriti Bhalerao, Orion Capuyon, Jehanzeb Khan, Cannon Yates
[1] San Jose State University
A cost-effective foot pressure mapping system has been designed for general use. The device aims to measure and visualize pressure distribution in the patient's foot while standing still.
Knee Brace for Baseball Players to Stabilize and Perfect Their Pitch
Santosh Dasari, Brian Lind
[1] San Jose State University
When Baseball players pitch, their lead leg needs to be straight while they release the ball. This knee brace will help players practice and build muscle memory for this process.